Home > VSI Crusher Manufacturer > mining ore equation for crusher

IntroductionLocation of The Crusher in An Underground MineMaterial HandlingTechnology and Equipment SelectionCostingDust ControlConclusions and RecommendationsReferencesCrushers play an important role in the material handling process for underground mine operations. The main purpose of a crusher is the size reduction of the feed. This size reduction is achieved by applying a force to the material, creating cracks in the material which in the end will cause the material to break into smaller pieces. There are two categories of crushers based on the way the force is applied to the material. For crushers of the first category apply force via pressure, the crushers of the second catego…

Global Mining Guidelines Group (GMG) 20150821_Morrell_Method-GMG-ICE-v01-r01 ... Mic Ore work index in crusher circuits (kWh/t) Mih Ore work index in HPGR circuits ... and the Morrell equations and their application (see Annex B). A worked example is provided in Annex C. 5.

The purpose of the primary crusher is to reduce the ROM ore to a size amenable for feeding the secondary crusher or the SAG mill grinding circuit. The ratio of reduction through a primary crusher can be up to about 8:1. Feed: ROM up to 1.5 m. Product: -300mm (for transport) to Reduction Ratio: 4:1 to 7:1

Gold mining, crushing, Zimbabwe, jaw crusher, cone crusher . 1.0 Introduction . Gold mining is the process of mining gold ores from the ground up till the stage where pure gold is extracted (Richiewiki, 2010). The gold ores are usually big and. have to be crushed to reduce them to a size of about 12mm diameter before pure gold can be extracted ...

26/12/2015· Crushing in Mineral Processing. In mineral processing or metallurgy, the first stage of comminution is crushing. Depending of the type of rock ( geometallurgy ) to be crushed, there are 2 largely different techniques at your disposition for crushing rocks. In principle, compression crushing is used on hard and abrasive rocks by placing them ...

The constant K 2 is also dependent on ore type and ranged from 1.4 to 1.5. A regression of Magdalinovic’s data including the feed 80% passing size gives an average value of 1.485 for K 2.If we extend this relationship to any sample of screened material then this gives an approximate estimate of the 80% passing size as 67.3% of the top size.

Jul 26, 2015· It is stated as a percentage of the new feed to the crusher. The equation for circulating load percentage is: R = 100/E/r-1 where R = circulating load, % E = screen efficiency, % r = % oversize in crusher product. To help understand this determination and the equation use, take the example of 200 tph original or new material to the crusher.