% !TEX encoding = UTF-8 Unicode
%
% This is a sample input file for the
% Journal of Language Modelling
%
% Please consult jlm-guidelines.pdf as well.
%
% The file has to be encoded in UTF-8.
% Obligatory document class:
\documentclass[
%% Submit the paper with the following option enabled. Remove it only
%% after the review phase:
anonymous,
%% Activate the following option if traditional TeX notation for dashes
%% (--) and double quotes (`` '') is required:
% TeXligs,
]{jlm}
% AUTHOR-PROVIDED LaTeX COMMANDS %%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% Please place your own definitions and macros below. Do not put
% any macro-definitions within the text body.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{document}
% The title of your work:
\title{A~method\\ for retroisotonal blabalysis\\ of~a~parallel
stream of volatile aromas in~the~semi-quasi-space}
% If the title is too long for the running head, please provide a
% shorter version here:
% (Otherwise leave this command commented out.)
\titlerunning{Retroisotonal blabalysis of volatile aromas}
% The version of title which will be used in the back matter. This
% command can only be used to alter line breaks compared to the main
% title:
\titlebackmatter{A~method for retroisotonal blabalysis of~a~parallel
stream of volatile aromas in the semi-quasi-space}
% If all authors have the same affiliation do not use the \inst
% command:
\author{Filigran Fifak\inst{1}
\and Gizbert Gryzogrzechotalski\inst{2}
\and Jeffrey Johansen\inst{2}
\and David~Drake\inst{1}
\and Craig Cadr\inst{3}
\and Kim~K.~Kominsky\inst{4}
\and Zachary~Zweistein\inst{1,3}
}
% If there are more than two authors, please abbreviate author list
% for running heads. Otherwise, comment out the following command:
\authorrunning{Filigran Fifak et al.}
% Short affiliations to be placed on the first page
% Please give the name of your institution e.g. a university or an
% institute (if not part of a university).
\affiliation{%
Fid\^o F\'o\`oish University of Fafia
\and
Institute of Computer Science PAS
\and
Princeton University
\and
Warsaw University of Technology
}
% Detailed affiliations are shown at the end of the paper
% Here you can include the name of your faculty or other subdivision.
% A postal address is also welcome.
% ORCID is considered obligatory for all authors.
% An email is optional (please take into the account that the PDF will
% be available on public Internet).
\detailedaffiliation{
Filigran Fifak
\orcid{0000-0000-0000-0000}
\email{filigran.fizydor.fifak@ffuf.edu.ff}
\institution{Institute of Blabal Fetoria\\Fid\^o F\'o\`oish University of Fafia\\
NW12 Fafia 92311, Fifa}
\and
Gizbert Gryzogrzechotalski
\orcid{0000-0000-0000-0000}
\email{gizbert.gryzogrzechotalski@ipipan.waw.pl}
\institution{Institute of Computer Science\\Polish Academy of
Sciences\\
Jana Kazimierza 5,\\ 01-248 Warszawa,
Poland}
\and
Jeffrey Johansen
\orcid{0000-0000-0000-0000}
\email{j.johansen@ipipan.waw.pl}
\institution{Institute of Computer Science\\Polish Academy of
Sciences\\
Jana Kazimierza 5,\\ 01-248 Warszawa,
Poland}
\and
David Drake
\orcid{0000-0000-0000-0000}
% \email{drake@ffuf.edu.ff}
\institution{Institute of Blabal Fetoria\\Fid\^o F\'o\`oish University of Fafia\\
NW12 Fafia 92311, Fifa}
\and
Craig Cadr
\orcid{0000-0000-0000-0000}
% \email{@}
\institution{Faculty of Blabalytics\\Princeton University, Princeton, USA}
\and
Kim~K.~Kominsky
\orcid{0000-0000-0000-0000}
\email{kkkomin@pw.edu.pl}
\institution{Warsaw University of Technology\\ Plac Politechniki 1,\\Warszawa, Poland}
\and
Zachary Zweistein
\orcid{0000-0000-0000-0000}
\email{zweistein@ffuf.edu.ff}
\institution{Institute of Blabal Fetoria\\Fid\^o F\'o\`oish University of Fafia\\
Fafia, Fifa;\\
Princeton University, Princeton, USA}
}
%% Add the following command after your paper is accepted. The
%% argument is the numeric ID for your paper as assigned by the OJS
%% system (displayed at the top of the page for your paper and also as
%% the last part of the URL).
% \paperid{0}
\keywords{blabalysis, volatile~aromas}
\maketitle % typesets the title
\begin{abstract}
The abstract should summarise the contents of the paper in at least
70 and at most 150 words. The present paper has no scientific
relevance and should be used as a practical example of text
formatting for the Journal of Language Modelling.
\end{abstract}
\section{Unicode input files\\ in the 21 century}
This is an example article for JLM. You can use arbitrary Unicode
characters in your file, provided they are present in the font:
αβγδρπ, «Какво е това?», naïve, crème brûlée, ˌpʃɛpjurˈkɔfskʲi,
‣→⅓←⅔⇒⅖, \textsf{αβγδρπ, «Какво е това?», \textit{naïve}, \textbf{crème \textit{brûlée}}}.
Please note, that the traditional \TeX\ notation for dashes and double
quotes has to be
activated with the \texttt{TeXligs} option, if desired. Without it
those characters are rendered as follows:\\
e--f g–h ``a'' “b” "b" `c' ‘d’\\
\textsf{e--f g–h ``a'' “b” "b" `c' ‘d’}\\
\texttt{e--f g–h ``a'' “b” "b" `c' ‘d’}.
\section{Important remarks\\ on the usage of references}
JLM uses author-year references, which are easier to follow for the
reader than numerical identifiers \citep[cf.][]{fifak:sigma_rho}. The
class internally loads the \texttt{natbib} package for that purpose.
Please employ the \verb+\citet+ command when referring to the
author(s), as advised by \citet{fifak:sigma_rho} or works cited, and
\verb+\citep+ – only for parenthetical references
\citep{fifak:sigma_rho}.
The bibliography should be ordered alphabetically \citep[pp.
20–22]{blarbarucki:blabalyser}, which can be achieved automatically
using Bib\TeX\ and the bibliographical style \texttt{jlm} used in this
example \citep{blarbarucki:blabalyser,fifak:aspects,fifak:blabal}.
\section{Illustrations and tables}
\subsection{Illustrations}
\label{sec:illustrations}
Your figures \emph{must} be available in one of the formats accepted
by \XeLaTeX{} (PDF, PNG, JPEG, PGF/TikZ). To include them in your
document it is advisable to use the standard package \texttt{graphicx}
(see the example in Figure~\ref{fig:ex}). \jlmfloatsetup3
\begin{figure}
\includegraphics{jlm-example-fig1-k44}
\caption{An example of an included figure}
\label{fig:ex}
\end{figure}
When preparing figures with external programs, please consider the
following suggestions:
\begin{itemize}
\item The printed version of the journal will be in black and white.
Please check that your figure is readable when stripped out of
colour. The pictures can, however, be in colour for the benefit of
the on-line version.
\item Prefer vector graphics formats, which will not deteriorate when
scaled.
\item If a bitmap is unavoidable, use a resolution of at least 300~dpi
(with the obvious exception of screenshots).
\item Do not use lossy JPEG compression for screenshots nor line
graphics (in particular for pictures containing textual elements).
\end{itemize}
\subsection{Tables}
\label{sec:tables}
Over-wide tables have to be reduced to the page width. You can reduce
the inter-column distances in such tables (the \verb|\tabcolsep|
parameter), rotate the table and place it as a full-page float, or use
a \verb|\small| font (if there is no other possibility).
\begin{table}
\caption{Values of some aspects}
\renewcommand{\arraystretch}{1.4}
\begin{tabular}{r|rrrrrl}
\hline
house &
\multicolumn1c{ʘ} & α\textsubscript{Cent} & \emph{M₃₁} & $\approx$
& \rlap{−}×
& \multicolumn1{c}{ᴥ} \\
\hline
1 & 0.43 & 102 & 12.4 & 4 & 2 & 1asp \\
3 & 0.45 & 412 & 32.6 & 14 & 7 & 4kid \\
7 & 0.16 & 111 & 92.1 & 3 & 9 & 2mer\\
12 & 0.49 & 224 & 25.5 & 1 & 1 & 4asp\\
\hline
\end{tabular}
\label{tab:ex}
\end{table}
Elements like Section \ref{sec:illustrations}, Figure~\ref{fig:ex},
Table~\ref{tab:ex}, and Equation~(\ref{eq:ex}) can be referenced
symbolically if you provide respective labels (see the source code for
this document).
For math you can use all constructs provided by the \texttt{amsmath}
package, e.g.:
\begin{align}
a & = c + d , \\
e & = f - d , \label{eq:ex}\\
g & = \sum_{\substack{
0\le i\le m\\
0<j<n}}
P_\infty(i,j)\times\mathbf{\Delta} , \notag\\
h &= (\alpha-\beta)\cdot\biggl[\sum_i a_i\Bigl\lvert\sum_j
x_{ij}\Bigr\rvert^p\biggr]^{1/p} .
\end{align}
\section{The reviewing process}
The journal uses a double-blind reviewing process. Your article
should be made anonymous before sending to the reviewers. When
submitting your paper please use the \texttt{[anonymous]} option of
the document class (see the header of this example), which will remove
the names and affiliations of the authors from the title page. Please
note, however, that you may have other identifying elements in your text
(especially in references), which you should adapt accordingly.
When the article is accepted these changes should be reverted. The
final version should contain a complete list of authors and their
affiliations.
\bibliographystyle{jlm}
\bibliography{example-bibdata}
\end{document}
%%% Local Variables:
%%% mode: latex
%%% TeX-master: t
%%% TeX-engine: xetex
%%% TeX-PDF-mode: t
%%% coding: utf-8
%%% ispell-local-dictionary: "british"
%%% End:
