Aditya Tikone's résumé. Created based on the Deedy CV template.
\begin
Discover why over 20 million people worldwide trust Overleaf with their work.
\documentclass[letterpaper]{deedy-resume}
\usepackage{fixltx2e}
\usepackage{hyperref}
\usepackage{color}
\usepackage[document]{ragged2e}
\begin{document}
%----------------------------------------------------------------------------------------
% TITLE SECTION
%----------------------------------------------------------------------------------------
\begin{flushleft}
\Huge \textbf{ADITYA A. TIKONE }\\*
\begin{small}
\vspace{.5mm}
\textbf { Email:} \color{gray} adityatikone302@gmail.com | Mob No: +1 (226)-700-6789
\vspace{.5mm}
\textbf { Home Address:} \color{gray} 1424, Huron Street , London, ON Pin Code: N5V 2E5
\vspace{0.5mm}
\textbf {ca.linkedin.com/in/adityatikone302} \color{gray}
\vspace{0.5mm}
\end{small}
\end{flushleft}
%----------------------------------------------------------------------------------------
% LEFT COLUMN
%----------------------------------------------------------------------------------------
\begin{minipage}[t]{0.32\textwidth}
\section{Education}
\descript{Manufacturing Engineering Technician with Co-op}
\location{Fanshawe College}
\location{January,2016-September,2017}
\sectionspace
\descript{Post Graduate in Mechanical Engineering }
\location{Fanshawe College}
\location{May,2015-December,2015}
\sectionspace
\descript{Bachelors of Technology in Mechanical Engineering}
\location {Jodhpur National University, India}
\location{2012}
\section {Skills }
\textbullet{}\textbf {Excellent team work skills} through project execution with production, maintenance and supplier teams . \\
\sectionspace
\textbullet{} \textbf {Strong software aptitude} using Solidworks, Nx Unigraphics, Pro-E, Autocad and SAP\\
\sectionspace
\textbullet{} Experience of working at different engineering positions.
\sectionspace
\section{Certificates}
\textbullet{}Nx-Unigraphics | Siemens [Certificate Id:SPLM/NX/2470]\\
\sectionspace
\textbullet{}Solidworks Professional 2016 | Dassault Systems
[Certificate ID : C-9V4W4WLYYC]\\
\sectionspace
\textbullet{}Autocad 2012 | Autodesk [Certificate No: 00303057]\\
\section{References}
\textbullet{} \textbf {Available upon request}
\\
\sectionspace
\
\end{minipage}
\hfill
%
%----------------------------------------------------------------------------------------
% RIGHT COLUMN
%----------------------------------------------------------------------------------------
%
\begin{minipage}[t]{0.66\textwidth}
\section{ WORK Experience}
\runsubsection{TFT GLOBAL INC.}|\descript{\small Supervisor }
\location { Feb 2018 -current | 390 Thomas St, Ingersoll , Ontario}
\begin{tightitemize}
\vspace{\topsep}
\item Prepared work instructions for quality inspections of automobile parts.
\item Managed and supervised all team members for training of respective sort.
\item Participated in orientation and training requirements for all Inspectors.
\item Liaise with company customer representative for relevant customers.
\item Provided input into inspector Performance Appraisals.
\end{tightitemize}
\sectionspace
\runsubsection{GENERAL MOTORS OF CANADA LTD.} |\descript{\small Project Engineer (Co-op) }
\location{ May 2017- Sept 2017 | Cami Assembly Plant, Ingersoll , Ontario}
\sectionspace
\begin{tightitemize}
\item Overseen and coordinated with engineering team in PPAP for new model launch, 2018 Chevrolet Equinox
\item Used NX Unigraphics, Auto-cad and team center for designing and dimensioning purpose.
\item Developed a design of a pin gage used in fender dies for a quick interchangeability and thus, decreased the time required for die change.
\item Coordinated with internal and external suppliers for quotes and ordered products and items needed for the new vehicle launch
\item Researched and updated several required service parts , needed in D2UC dies for a new vehicle launch.
\item Created budgeting and forecasting of the project.
\item Communicated professionally in written and verbal with the vendors and buyers.
\item Extensive use of SAP.
\item Ensured production staff was set with tooling and dies for each shift.
\end{tightitemize}
\sectionspace
\runsubsection{KAPCO TOOL AND DIE LTD. - NARMCO} |\descript{\small Design Engineer (Co-op) }
\location{ Sept 2016 - Dec 2016 | Windsor , Ontario}
\begin{tightitemize}
\vspace{\topsep}
\item Designed and detailing of Stamping Dies using 3D Cad tool Pro-E
\item Technical knowledge of manufacturing processes used in stamping dies
\item Basic knowledge regarding simulation.(Software : Autoform)
\item Inspecting in the assemblies of the dies for any interferences and troubleshooting the problems.
\item To check if all the items/material are ordered in reference to the bill of materials.
\end{tightitemize}
\sectionspace
\runsubsection{Aditya Engineers} |\descript{\small Manufacturing and Design Engineer }
\location{Aug 2012 – Feb 2015 | Gujarat , India}
\vspace{\topsep}
\begin{tightitemize}
\item Design and manufactured gauges, jigs and fixtures using cad software for our client Set-co Automotive Ltd., India
\item Designed and manufactured a Blow Mold tool die of a plastic bottle for our client General Motors, India.
\item Reverse Engineered plastic components supplied by clients.
\item Developed assembly drawings for clients.
\item Understanding of geometrical dimension and tolerances given in drawing.
\item Created Quotes for clients, process planning charts of a component as well as inspection reports.
\item Troubleshooting manufacturing issues on the shop floor.
\end{tightitemize}
\end{minipage}
\end{document}